In the entire working environment of plastics, if there is an abnormality in the production line of the plastic film granulator, how should it be inspected? Among the following several factors, we should keep in mind and also need to understand the structural principles of the production line and spare parts of the plastic film granulator to avoid damaging the parts during disassembly.
Before disassembly and assembly, the surface soil, oil stains, and other impurities should be cleaned thoroughly. During the disassembly and assembly process, the cleanliness of the production line of the plastic film granulation machine should be continuously maintained.
When disassembling the production line of the plastic film granulator, it is necessary to rely on suitable tools and not forcefully strike to avoid abnormal phenomena such as damage or deformation of the components. Follow the required procedures and disassemble the equipment as little as possible.
When disassembling the production line of plastic film granulator equipment, it is necessary to prepare for installation to improve installation efficiency and ensure the correctness of installation. When disassembling and assembling, attention should be paid to checking and remembering the specific location of each component.
At the same time, it is necessary to disassemble and assemble the production line of the plastic film granulation machine in the correct order. Generally, from accessories to main components, the entire machine is first disassembled into an assembly, and then the assembly is disassembled into components, and then the components are disassembled into components.
After all components are disassembled, they should be classified and stored in detail based on their material properties and precision.
If abnormal sound or unstable operation of production equipment is found, and the cause of the malfunction is unknown, it should be stopped in a timely manner and solved by relevant personnel. Plastic granulator equipment is not allowed to be repaired during startup and operation, and the transmission part is not allowed to be touched by hand. When disassembling and installing screws and parts in the forming mold, it is not allowed to directly strike the parts with a heavy hammer. If necessary, fill with hardwood and then tap to remove or install parts. If there is no production material in the barrel, the screw is not allowed to rotate for a long time inside the barrel, and the idle time should not exceed 2-3 minutes.
If there is a malfunction in the production of plastic granulation machinery, it is not allowed to face the material barrel or forming machine head during operation to prevent the molten material inside the barrel from splashing and injuring people. During the normal production process of plastic granulation machines, it is necessary to frequently observe the oscillation changes of the main motor ammeter pointer. If overload occurs for a long time, the machine should be shut down in a timely manner, the cause of the fault should be identified, and production can only continue after the fault is resolved.
Our company is professional in producing all kinds of plastic recycling machine. If necessary, you can consult relevant content at any time and look forward to our cooperation.